IFS
The IFS(Integral Field Spectrograph) uses an image splitter with a cutting unit of 0.2 ′′ to divide the FoV into 32 units, and disperses these units within 0.35-1 µm in two bands of red and blue to obtain the spectrum of each unit. It has a FoV greater than 6′′ × 6 ′′, a spatial resolution of ∼0.2′′, and a spectral resolution R > 1000, covering the entire optical band of 0.35-1 µm in the three-dimensional spectroscopic observation.
The IFS transmission efficiency combined with the detector efficiency is more than 40% on average in the two main red and blue bands. The detection capability of the surface source requires that the signal-to-noise ratio (S/N) of a single spectral resolution unit for the target source with a surface brightness of 17 mag/arcsec2 in the B band should be > 10 after 20×300 s exposure stacking. The detector readout noise is approximately 5.5 e − /pixel, which is usually the main source of noise during IFS observations. In practice, the detectors can be combined for readout, which can provide the possibility of further improving the detection efficiency for sciences that do not require high spectral resolution or spatial resolution.
The observation of IFS can simultaneously obtain the twodimensional structure and spectral information of the target, which is suitable for the research that requires spatially analyzing the chemical composition or physical properties of the observational target, such as the physical properties of the core region near the SMBH at the center of the galaxy, the co-evolution of galaxies and black holes, star formation in specific environments within galaxies, the dynamic properties of the source galaxy of the strong gravitational lensing and its dark matter distribution, Galactic nebulae, TDEs, Solar System objects, etc.